Top Scuba Diving Fins 2021

Scuba divers, snorkelers etc. use fins to move through water efficiently, as human feet being very small provide relatively poor thrust, especially when the diver is carrying equipment that increases hydrodynamic drag. Very long freediving and mono-fins are used by freedivers as a means of underwater propulsion that does not require high frequency leg movement.

Also called pool fins or Swimming fins are shaped like a shoe, are worn barefoot and therefore only used for warm water. In the past (around 1960) mostly made of black or blue rubber and with a triangular blade, today it’s usually an elongated blade on colored plastic with streamline channels. This type of fin is often used in Scuba Diving.

Also called Scuba Diving Fins the foot section of heel fins is shaped like a slipper and offers enough space for heat-insulating neoprene shoes (booties) or the foot sections of a dry suit. The fins are held at the heel with an adjustable rubber band or a spring strap (special padded steel spring). These fins are used in cold water due to the insulation possibility of the foot by Neoprene shoes but can be used in warm water too. This type of fin is the most used in Scuba Diving.

Pretty much the same as the Open Heel Fins but the blade is split in the middle to increase speed. However The fins are very soft and with a lot of current they might not perform as good as normal open heel fins. This type of fin is often used in Scuba Diving. Split Fins are also available as full foot fins.

Freediving Fins are very similar to swimming fins, except they are far longer, and designed to work with slow stiff-legged kicks that conserves energy. The vast majority are made in the “full-foot” design with very rigid foot pockets, which serves to reduce weight and maximize power transfer from the leg into the fin. Freediving fins are commonly made of plastic, but are also often made from materials such as fiberglass and carbon fiber.
This type of fin is rarely used in Scuba Diving.

A mono fin is typically used in fin-swimming and free-diving. It consists of a single surface attached to foot pockets for both the free-diver’s feet. Mono fins can be made of glass fiber or carbon fiber. The diver’s muscle power and swimming style, and the type of activity the mono fin is used for, determine the choice of size, stiffness, and materials.
This type of fin is not used in Scuba Diving.

The foot pocket should fit nicely to reduce water resistance and parachute effect and to increase efficiency.
Heel straps can be made from rubber or stainless steel spring.

• Powered by ForcElast Technology
• TUSA patented 20° Angled Blade Design (A.B.D.)
• Multi-compound foot pocket increases power transfer to the fin blade
• Newly designed anatomic foot pocket enhances comfort
• Three channel blade with crescent tip maximizes propulsion
• Reinforced blade side-rails and vents fine-tune performance
• Standard with Anatomic Fin Strap (A.F.S.)
• TUSA patented EZ Strap and buckle system

• New Foot Pocket, More Comfort, Great Performance
• OPB (Optimized Pivoting Blade) Fin Technology that ensures the blade is always at an optimal angle during both the up and down stroke
• Tri Material Construction Provides Superior Performance & Maximum Elasticity
• ABS (Adjustable Binding System) Fin Buckles with One Finger Release
• Super Channel Thrust Technology System for Optimal Water Channeling

• Rubber construction is known for its durability, promising a lifetime of use.
• Proven vented design decreases drag on the up stroke and enhances thrust on the down stroke.
• Most durable fin on the market
• Great for frog kicking in cave or wreck diving
• Stainless Steel Spring heel strap secures fin for ease of pre-dive preparation

• OPB system for greater efficiency – OPB (Optimized Pivoting Blade) Fin Technology that ensures the blade at the optimal angle at all times providing increased efficiency and power
• Channel thrust technology – Maximum thrust with minimum effort!
• ABS Plus buckles – Both buttons must be pressed at the same time to open the buckle. This new system also makes it easier use, by reducing the effort required for both opening and closing
• Lightweight, easy and efficient

• The articulated joint allows the blade to pivot and the entire blade is able to generate thrust. Pivot control technology ensures the most efficient angle of attack is maintained no matter how hard or softly you kick, generating thrust without drag or wasted energy
• Clean water blade geometry for optimum propulsion. Water is free to flow onto the working section of the blade, drag is reduced and thrust increased
• Variable pivot control ribs insures that the most efficient angle of attack is maintained across all strengths of kick. | Ergonomic foot pocket with extended heel plate insuring ultimate power transmission with less leg strain
• Durable Monprene construction making SeaWing virtually indestructible. | Wing tips arc upwards, increasing high-speed stability.
• Marine quality bungee heel strap with custom adjustment system for total comfort and convenience

• Available Sizes: Medium, Large, X-Large
• Comes with a pair
• Long lasting stainless steel.
• Comfortable design
• Heavy duty material